Raritan PX2-1000 SERIES, Руководство пользователя

Страница: 233 / 648

Chapter 6: Using the Web Interface
214
Creating Actions
The PX comes with three built-in actions:

System Event Log Action: This action records the selected event in
the internal log when the event occurs.

System SNMP Notification Action: This action sends SNMP
notifications to one or multiple IP addresses after the selected event
occurs.

System Tamper Alarm: This action causes the PX to show the alarm
for the DX tamper sensor in the Alarms section of the Dashboard
until a person acknowledges it. By default, this action has been
assigned to the built-in tamper detection event rules. For information
on acknowledging an alarm, see
Alarms List
(on page 105).
Note: No IP addresses are specified in the "System SNMP Notification
Action" by default so you must specify IP addresses before applying this
action to any event rule.
The built-in actions cannot be deleted.
To create new actions:
1. Choose Device Settings > Event Rules. The Event Rule Settings
dialog appears.
2. Click the Actions tab.
3. Click New.
4. In the "Action name" field, type a new name for the action. The
default name is New Action <number>, where <number> is a
sequential number starting at 1.
5. In the Action field, click the drop-down arrow and select the desired
action:
Action Function
Execute an action
group Creates a group of actions comprising existing
actions. See
Action Group
(on page 216).
Alarm Requires the user to acknowledge the alert
when it is generated. If needed, you can have
the alert notifications regularly generated until
a person takes the acknowledgment action.
See
Alarm
(on page 217).
External beeper Enables or disables the connected external
beeper, or causes it to enter an alarm cycle.
See
External Beeper
(on page 218).