Raritan PX2-1000 SERIES, Руководство пользователя

Страница: 236 / 648

Chapter 6: Using the Web Interface
217
7. To remove an action from the action group, select it from the Used
Actions list box, and click to move it to the Available Actions list
box. To make multiple selections, press Ctrl+click or Shift+click to
highlight multiple ones.
To remove all actions, click .
8. Click OK.
9. To create additional action groups, repeat Steps 3 to 8.
Alarm
The Alarm is an action that requires users to acknowledge an alert. This
helps ensure that the user is aware of the alert.
If the Alarm action has been included in a specific event rule and no one
acknowledges that alert after it occurs, the PX resends or regenerates an
alert notification regularly until the alert is acknowledged or it reaches the
maximum number of alert notifications.
For information on acknowledging an alarm, see
Alarms List
(on page
105).
To create an Alarm action:
1. Click the Actions tab.
2. Click New.
3. In the "Action name" field, type a new name for the action. The
default name is New Action <number>, where <number> is a
sequential number starting at 1.
4. In the Action field, click the drop-down arrow and select the desired
action: Alarm.
5. In the Alarm Notifications list box, specify one or multiple ways to
issue the alert notifications.
a. In the Available Actions field, select the method to send alert
notifications. Available methods vary, depending on how many
notification-based actions have been created.
Notification-based action types include:
 External beeper
 Syslog message
 Send email
 Send SMS message
 Internal beeper
If no appropriate actions are available, click Create New
Notification Action to immediately create them.