Raritan MasterConsole Z, Руководство пользователя, Страница: 12 / 34

6 M
ASTER
C
ONSOLE
Z U
SER
G
UIDE
C. Connect one end of a Category 5e UTP cable to the O (Out) Cat5 port on the MZCIM-
PS2. Connect the other end of the cable to the In Cat 5 Port on the rear panel of the
MZUST.
D. If you are not adding more computers to the User Station, insert a TER-ZCIM terminator
in the MZCIM-PS2 I (In) port.
E. The MZCIM-PS2 factory name and serial number appears on the User Console attached
to the MZUST; this represents the connected computer.
F. To connect additional computers:
ƒ
Remove the TER-ZCIM terminator from the (last) MZCIM-PS2 I (In) port and set it
aside.
ƒ
Connect one end of a Category 5e UTP cable to the MZCIM-PS2 I (In) port from
which the terminator has been just removed.
ƒ
Connect the other end of the Category 5e UTP cable to the O (Out) port on the next
MZCIM-PS2 being added.
ƒ
If no additional computers are being added, insert the TER-ZCIM terminator into the
last MZCIM-PS2 I (In) port.
G. Press the default hot key ( Scroll Lock ) twice rapidly at the MZUST User Console to
activate the On-Screen Display (OSD).
H. Press F2 to activate the Selection Menu.
I. The computer you just connected appears as a new channel in the Selection Menu at the
MZUST User Console. The MZCIM-PS2 factory name and serial number appear.
2.2 For MZCIM-USB:
A. Attach an MZCIM-USB video (HD15) connector to the computer’s video port.
B. Connect the MZCIM-USB keyboard/mouse USB connector to the computer’s USB
keyboard/mouse port.
C. Connect one end of a Category 5e UTP cable to the O (OUT) Cat5 port on the MZCIM-
USB. Connect the other end to the Cat 5 Ports In on the User Station (MZUST).
D. If you are not adding more computers to the User Station, insert a TER-ZCIM terminator
in the MZCIM-USB I (IN) port.
E. The MZCIM-USB factory name and serial number appear in the Selection Menu of the
User Console attached to the MZUST. This represents the connected computer.
F. To connect additional computers:
ƒ
Remove the TER-ZCIM terminator from the (last) MZCIM-USB I (IN) port and set
aside.
ƒ
Connect one end of a Category 5e UTP cable to the MZCIM-USB I (IN) port from
which the terminator has been just removed.
ƒ
Connect the other end of the Category 5e UTP cable to the O (OUT) port on the next
MZCIM-USB being added.
ƒ
If no more computers are added, insert the TER-ZCIM terminator into the last
MZCIM-USB I (IN) port.
G. Press the default hot key ( Scroll Lock ) twice rapidly at the MZUST User Console
activate the OSD.
H. Press the F2 key to activate the Selection Menu.
I. The computer you just connected appears as a new channel in the Selection Menu at the
User Console of the MZUST. The MZCIM-USB factory name and serial number appear.