background image

8

L524 1016jlc                                                                                             

            Specifications Subject to Change Without Notice  Printed in U.S.A.

     

  Raritan Engineering Company warrants to the original purchaser that this product is free of defects in materials or work-

manship for a period of one year from the product’s date of purchase.  Should this product prove defective by reason of 

improper workmanship and/or materials within the warranty period, Raritan shall, at its sole option, repair or replace 

the product.

1.   TO OBTAIN WARRANTY SERVICE, Consumer must deliver the product prepaid, together with a detailed description of 

the problem, to Raritan at 530 Orange St., Millville, N.J. 08332, or 3101 SW 2nd Ave. Ft. Lauderdale, FL 33315.  When 

requesting warranty service, purchaser must present a sales slip or other document which establishes proof of purchase. 

THE RETURN OF THE OWNER REGISTRATION CARD IS NOT A CONDITION PRECEDENT OF WARRANTY 

COVERAGE.  However, please complete and return the owner Registration Card so that Raritan can contact you should 

a question of safety arise which could affect you.

 2.   THIS WARRANTY DOES NOT COVER defects caused by modifications, alterations, repairs or service of this product 

by anyone other than Raritan; defects in materials or workmanship supplied by others in the process of installation of this 

product; defects caused by installation of this product other than in accordance with the manufacturer’s recommended 

installation instructions or standard industry procedures; physical abuse to, or misuse of, this product.  This warranty 

also does not cover damages to equipment caused by fire, flood, external water, excessive corrosion or Act of God.

 3.   ANY EXPRESS WARRANTY NOT PROVIDED HEREIN, AND ANY REMEDY FOR BREACH OF CONTRACT 

WHICH BUT FOR THIS PROVISION MIGHT ARISE BY IMPLICATION OR OPERATION OF LAW, IS HEREBY 

EXCLUDED AND DISCLAIMED.  ALL IMPLIED WARRANTIES SUCH AS THOSE OF MERCHANTABILITY 

AND OF FITNESS FOR A PARTICULAR PURPOSE, IF APPLICABLE, AS WELL AS ANY IMPLIED WARRAN-

TIES WHICH MIGHT ARISE BY IMPLICATION OF LAW, ARE EXPRESSLY LIMITED TO A TERM OF ONE 

YEAR.  SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG A LIMITED WARRANTY LASTS, SO 

THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

 4.    UNDER NO CIRCUMSTANCES SHALL RARITAN BE LIABLE TO PURCHASER OR ANY OTHER PERSONS FOR 

ANY SPECIAL OR CONSEQUENTIAL DAMAGES, WHETHER ARISING OUT OF BREACH OF WARRANTY,  

BREACH OF CONTRACT , OR OTHERWISE.  SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITA

-

TION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION 

MAY NOT APPLY TO YOU.

 5.   No other person or entity is authorized to make any express warranty, promise or affirmation of fact or to assume any 

other liability on behalf of Raritan in connection with its products except as specifically set forth in this warranty.

 6.   This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

LIMITED WARRANTY

SAVE THESE INSTRUCTIONS

Should a problem arise, please feel free to contact Raritan Technical Support at either the 

Millville, NJ or Fort Lauderdale, FL office.

                                    

               

      TROUBLESHOOTING

   No inlet water: 

1. Check that supply valve is open

 

 

   

Inlet water does not shutoff:

1.   Check if rinse water lever is moving 

freely

2.   Replace inlet valve 

3.   Low water pressure

      Bowl fills with water from discharge:

ge side

      1. Joker valve not sealing 

   2. Flapper valve not sealing, replace valves as 

needed 

   Pump too hard:  

   1. Closed seacock--open

   2. Blocked holding tank vent--clear 

   3. Clogged hose, pump--clear  

8

530 Orange Street,  Millville, NJ  08332 USA

Telephone:   856-825-4900 

FAX:   856-825-4409  

www.raritaneng.com 

    

 

     

Fort Lauderdale, FL    

 

 

 

Telephone:   954-525-0378 

 

Содержание FRESH HEAD









Отзывы: