INSTALLATION
Parts Included
All Toilets
Toilet Bowl (Household or Marine)
Seat and Cover
Discharge pump assembly
Heavy Duty Push Button Switch (#164000)
Mounting pads
Lower Motor Cover
Sea Water Model
Remote Intake Pump
3/4" Hose Barb straight fitting
3/4" Hose Barb - 90° elbow fitting
Plug Fitting
In-Line Strainer with fittings
3/4" Stainless Steel Hose Clamps (2)
Pressurized Freshwater Models
Atmospheric Vacuum Breaker with fittings
Solenoid Valve with fittings
Solenoid Valve Mounting Bracket
Flush Control Options
Toilet Control (#TC*+) wall switch
Raritime Control (#RTC*) times the push button
Flush Control (#) independant control
Additional Parts Required
•
Four 1/4" (6mm) stainless steel mounting
bolts or lag screws and washers (Sea Water
Models)
•
Two 1/4" (6mm) stainless steel mounting bolts
or lag screws and washers (Freshwater Models)
•
Four 5/16" (8mm) stainless steel mounting
bolts or lag screws and washers
•
1 1/2" (38mm) I.D. discharge hose
•
3/4" (19mm) I.D. reinforced intake hose
•
3/4" (19mm) and 1 1/2" (38mm) hose clamps
(two for each connection below waterline)
•
Wire
•
Terminals
INSTALLATION
•
Fuse/circuit breaker
Tools Required
•
5/16" nut driver
•
Wrench or screw driver (depending on mounting
fastener)
•
Bit for drilling mounting surface (depending on
fastener used)
•
Wire cutters
•
Wire terminal crimpers
•
Hose cutters
•
Tape measure
6
* Specify Voltage
+ Specify Color
