CC-SG E1 Quick Setup Guide
1
QSG-CCE1-0K-v5.4.0-E
255-80-5400-01-RoHS
CommandCenter Secure
Gateway E1 Models
Quick Setup Guide
Thank you for your purchase of the CommandCenter Secure Gateway
™
, Raritan's management software platform
engineered to consolidate secure access and control of IT devices. This Quick Setup Guide explains how to install and
configure the CommandCenter Secure Gateway.
For additional information on any aspect of the CommandCenter Secure Gateway, see the accompanying online help
accessed from the CommandCenter Secure Gateway or the CommandCenter Secure Gateway help in PDF format,
which can be downloaded from the Firmware and Documentation section of Raritan's website
(http://www.raritan.com/support/firmware-and-documentation/).
Diagram Key
1
LAN ports
2
Power
3
KVM ports
4
Extra LAN ports
Do not use
I. Unpack CC-SG
With your shipment, you should receive:
(1) CommandCenter Secure Gateway E1 unit
(1) CommandCenter Secure Gateway E1 front bezel
(1) Rack mount kit
(2) Power supply cord
(1) CAT 5 network cable
(1) Printed Quick Setup Guide
(1) Registration and Warranty papers
Determine Rack Location
Decide on a location in the rack for CC-SG, in a clean,
dust-free, well-ventilated area. Avoid areas where heat,
electrical noise, and electromagnetic fields are generated and
place it near a grounded power outlet.
QS R ule
II. Rack-mount CC-SG
Before rack-mounting CC-SG, unplug all power cords and
remove all external cables and devices.
The rack mount kit contains:
2 pairs of rack rails
