background image

1

  THE FOLLOWING ARE CAUTIONARY STATEMENTS THAT MUST BE READ AND 
  FOLLOWED DURING BOTH INSTALLATION AND OPERATION

 

 WARNING:

 

Raritan Engineering Company, Inc. Recommends that a qualified  person or electrician install this 

product.  Equipment damage, injury to personnel or death could result from improper installation.  

Raritan Engineering Company,  Inc.  accepts no responsibility or liability for  damage to equip-

ment, or injury or death to personnel,  that may result from improper installation or operation of 

this product.

  WARNING:

 

RISK OF SHOCK OR FIRE 

- If the pump is operated in an area containing flammable vapors, the 

wire leads must be joined by insulated mechanical locking connectors. Loose or inadequate wire 

connections can spark, resulting in an explosion resulting in property damage, injury, or death.  

Always use recommended fuse/circuit breaker and wire size.

  WARNING:

 

Hazard of Flooding 

- Any installation made below the waterline must have vented loops posi

-

tioned properly and all hose connections should be double-clamped.  Both intake and discharge 

seacocks should always be in the closed position when the toilet is not in use.  Failure to do so 

may result in flooding, property damage and loss of life.

Model 53 Macerator Pump

Installation, Operation and Repair Manual

1-856-825-4900

www.raritaneng.com

4 3/9
a111b

1 a25b Nr��

1 1/2" PT[]

F 3/4
a249b

2

a51b

5 8/16

a138b

3 F/16

aF0b

1 13/16

a45b

1/2

a13b

1 3/4

a44b

11/16

a18b

3 5/9

aF1b

51

2

a13Fb

6 3

16

a158b

Macerator Pump 53100**

 

Macerator pump with Waste Valve 53101**

L552  1022jlc                                                                                 

4 3/4
a120b

1 a25b Nr��

1 1/2" PT[]

1 1/2 a39b Nr��

5 3/4
a145b

2

a51b

10 1/9

a258b

3 5/9

aM1b

5 3/4
a146b

1 13/16

a45b

3 M/16

aM0b

1/2

a13b

1 3/4

a44b

11/16

a18b

3 13/16

aM8b

    1

** Specify Voltage 12 (12 VDC) or 24 (24 VDC)

Inches [MM]

Inches [MM]

Содержание 53









Отзывы: