ATTACHING THE SCREEN PROTECTOR
Attaching the screen protector following these instructions:
All Raptors are provided with a screen protector which must be used in order to maintain
the warranty of the device. A screen protector not only helps defend against scratches
and knocks to the screen, but it will also helps prolong the life of your device.
Step 1:
Check
if there
isn’t
already
a
screen
protector
on
the
device.
Most
Raptor
devices
have
one
pre-attached in the box.
Step 2:
Remove the old screen protector if necessary by simply peeling it of. Now make sure you
clean
the screen thoroughly to remove dirt, dust and any fluff that will create bubbles in the adhesion.
Step 3:
Peel
the underside of the screen protector off, being careful not to let it touch anything.
Step 4:
Now carefully line up the top of the screen protector with the top of the device LCD.
Carefully let it drop onto the screen making sure it lines true all the way down to the bottom as you
go. Use a credit card to smooth out any bubbles as you go.
Step 5:
Once you’re happy,
peel
off the top protective layer of the screen protector off and you’re
done!
Содержание R8
Страница 1: ...RAPTOR RAPTOR R8 Quick Start ...
