User Manual
31
SMS
: add the contacts to the Black or White List.
o
Settings
: here you can enable/disable the following firewall combinations :
Black List
,
White
List
,
Numbers not stored in the Phonebook
,
Black List +not stored in the Phonebook
.
The option
Firewall close
allows to disable at the same time all the firewall combinations
previously enabled.
Note: when the firewall type has been selected, you will be requested to set (if you want) the Activation Time and
the Rejection Method (for the Calls Firewall).
Answering Machine
The built-in Answering machine allows people to leave voice messages for you when you can't answer your phone.
Recorded messages:
Here you can listen to the recorded phone message that are stored in memory.
Settings:
From here, you can toggle on/off the auto answer, select the storage path, fix the pickup time
(3, 5, 10 or 30 seconds), fix the record duration (30 seconds, 1 minute, 3 minutes, 5 minutes or
unlimited), use the default greeting message or select one from your audio files, enable/disable remote
access using any DTMF telephone.
For the remote access, with the above said option enabled, you need a DTMF (touchtone) telephone. When
the answering machine has picked up the call, you'll hear the invitation to leave a message; at this point
you can digit “
#
” and then wait for the prompt to digit your password (
1234
as default).
Note: remote access supports listening only.
Phone Control
Phone Control
is a function that has been designed to improve mobile device users' privacy and security. It is
composed of two applications (
SIM binding and Remote Control
, plus
Trusted Numbers
), allowing the user to
manage security in different modes.
SIM binding:
The SIM binding function is offered to help end-user to find his phone in case it has been
lost or stolen. The function is based on the binding between SIM card and phone: the device is able to
recognize when a different SIM card is inserted into the phone and immediately alerts by SMS the 5
trusted numbers previously set by the owner.
By activating this option, the phone password will be requested (1122). Please refer to the paragraph
Settings > Security settings > Phone Security >
Change password
for the instructions on how to
modify this password.
Select “
Activation
” and choose “
On
” to enable the function. The user must now insert at least one
number for SMS notification. From
Phone Control
menu, select “
Trusted Numbers
” and insert up to 5
phone numbers to receive the message.
After completing the configuration, at every start-up the phone will check the presence of the SIM cards to
which it is bound to. If the two SIM cards are inverted or one of them has been removed, the phone still
starts regularly.
If a not-bound SIM card is inserted into the SIM1 or SIM2 slot, the phone shall display the “Input phone
password” popup (the default password is
1122
, freely modifiable by user). If the password is correctly
inserted, the phone starts regularly, but a popup will advise the user that the SIM card is changed: “SIM
card is changed. Do you want to bind it?” Choosing “Yes”, the current SIM cards will be bound replacing
the old ones; choosing “No”, the old binding will remain active.
In case the wrong password is inserted, the phone will normally start and provide the “new” user all the
functionalities except for the “
Phone control
” menu. In the meantime, an alert SMS ( - “Attention: this
phone number is using your mobile phone IMEI: XXXXXXXXXXXXXXX” - ) will be sent to all the trusted
phone numbers set in the menu from each replaced SIM card. Every time the power on password is
wrongly inserted, the phone will continue to send out alert SMS. If SIM1 has no money or is out of range,
SIM2 will provide to send the alert SMS. If the SMS is not correctly sent out for any reason, the phone will
attempt to send the SMS out periodically, until the SMS is correctly sent out.
Содержание NGM
Страница 1: ...User Manual...