Raptor DT-826413, Инструкция по эксплуатации

Страница: 3 / 16

GB
3
Safety instructions
1. Before mounting or maintenance, always switch off the electrical supply to
avoid electric shock.
2. The lamp must be earthed.
3. If the external flexible cable or cord of this luminaire is damaged, it must
immediately be replaced by the manufacturer, his service agent or a qualified
technician.
4. Before maintenance work takes place, the power must be switched off. The
maintenance should be done only by a qualified electrician.
5. DT- DT-826642: The appliance is equipped with sockets. Make sure
that the total output is max 13A. DT-826420 comes with a schuko plug and the
total output is max. 16A.
6. The lamp must only be used with the bracket extended.
A. Cover
B. LED
C. Body
D. Handle
Correct disposal of this product
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.
LED LIGHT INSTRUCTIONS
Read the User Instructions carefully before use.

Save these instructions for future reference.

Do not look directly into the work lamp when it is switched on.

Keep out of the reach of children.

Can be used indoors and outdoors. Charge the lamp in dry, indoor location.

Do not immerse in water or any other liquid.
Specifications
Type Rated Power
Supply
Current Power
factor
Tempered
Glass Weigh
t Maximum
projected
area Dimensions Remark:
Electric shock
protection class: I
External light
protection class:
IP54
Lamp socket size:
LED
Rated
voltage:220-240V~
50/60Hz
DT-8264
13 45W
（
250*0.2W
）
MAX.0.2
1A
＞
0.9
347*194*2.3
mm 2.3kg 0.07M 2 385*315*90m
m
Safety instructions
1. Before mounting or maintenance, always switch off the electrical supply to avoid electric shock.
2. The lamp must be earthed.
3.The power cord must be H07RN-F 3x 1.5 mm² cable waterproof.
4.If the external flexible cable or cord of this luminaire is damaged, it must immediately be replaced by the
manufacturer, his service agent or a qualified technician.
5. Replace any cracked protective shield.
6.Before maintenance work takes place, the power must be switched off. The maintenance should be done
only by a qualified electrician.
7.
The appliance is equipped with sockets. Make sure that the total output is less than 16A.
8.The lamp must only be used with the bracket extended.
A. Cover
B. LED
C. Body
D. Handle
E. Switch
F. Socket
G. Bracket
H. Driver
LED LIGHT INSTRUCTIONS
Read the User Instructions carefully before use.

Save these instructions for future reference.

Do not look directly into the work lamp when it is switched on.

Keep out of the reach of children.

Can be used indoors and outdoors. Charge the lamp in dry, indoor location.

Do not immerse in water or any other liquid.
Specifications
Type Rated Power
Supply
Current Power
factor
Tempered
Glass Weigh
t Maximum
projected
area Dimensions Remark:
Electric shock
protection class:
I
External light
protection class:
IP54
Lamp socket size:
LED
Rated
voltage:220-240V~
50/60Hz
DT-8264
13 45W
（
250*0.2W
）
MAX.0.2
1A
＞
0.9
347*194*2.3
mm 2.3kg 0.07M 2 385*315*90m
m
Safety instructions
1. Before mounting or maintenance, always switch off the electrical supply to avoid electric shock.
2. The lamp must be earthed.
3.The power cord must be H07RN-F 3x 1.5 mm² cable waterproof.
4.If the external flexible cable or cord of this luminaire is damaged, it must immediately be replaced by the
manufacturer, his service agent or a qualified technician.
5. Replace any cracked protective shield.
6.Before maintenance work takes place, the power must be switched off. The maintenance should be done
only by a qualified electrician.
7.
The appliance is equipped with sockets. Make sure that the total output is less than 16A.
8.The lamp must only be used with the bracket extended.
A. Cover
B. LED
C. Body
D. Handle
E. Switch
F. Socket
G. Bracket
H. Driver
E. Switch
F. Socket
G. Bracket
H. Driver
CAUTION:
The light source of the lamp cannot
be replaced, if broken, replace lamp.