27
9.6 Information Tab (Manufactures Data)
The “Info” tab displays information about the camera such as the manufactures data:
FPGA & Micro Version:
The current firmware version of the camera is displayed.
Serial Number:
States the serial number of the camera.
Build Date & Code:
Gives the date that the camera was built.
ADC & DAC Calibration Values:
These are calibration values that are used to set the TEC
set point and read back the sensor and PCB temperatures. They are not needed for the user
as the XCAP GUI has simple buttons to set and read back these temperatures, discussed in
earlier sections.
CCD & PCB Temperature:
The current sensor and PCB temperature of the device can be
read by clicking “Update Temp”.
The parameters discussed can be seen in Figure 21.
Figure 21: Information Tab.
