Rapsody RSH-300, Руководство пользователя

Страница: 15 / 32

114 4
__
Available on Linux 2.4 or later.
After booting, log in as a root user.
Connect this product and turn the power on.
Confirm whether this product’s partition is
detected using partition tool, fdisk. Make a
mount pointer, for example, rapsody, in folder
mount(/mnt) and edit /etc/fstab to add the
following:
/dev/sda1/mnt/rapsody vfat nosuto, user 0 0 ->
for HDD formatted with FAT32
/dev/sda1/mnt/rapsody ntfs nosuto, user 0 0 ->
for HDD formatted with NTFS
You can use after log in again.
Create mount pointer in the same way as above
and then mount this product by typing as
follows:
Mount -t vfat/dev/sda/mnt/rhapsody -> for HDD
formatted with FAT32
Mount -t ntfs/dev/sda/mnt/rhapsody -> for HDD
formatted with NTFS
[[A Au utto o M Mo ou un ntt]]
[[M Ma an nu ua all M Mo ou un ntt]]
[[H Ho ow w tto o S Stto op p U Us siin ng g R Ra ap ps so od dy y]]
You can unmount Rapsody in Device Manager.
It is assumed that RSH-300 is detected as
sda in the example above. Drive name may
subject to change depending on user
environment. Please type the name of drive
detected by USB Mass Storage.
N No otte e
Use on Linux
www.rapsody.ch