Rapoo H3050, Быстрый старт

Страница: 6 / 11

1
Installation
Configuration
Trouble Shooting
n o i t u l o S m e l b o r P
If your problem is not solved, please contact the helpdesk at www.rapoo.com/H3050/faq
No sound at all
My friend on msn/skype does
not hear what I’m saying
Bad sound quality
Sound drop out when
changing the volume
Volume control under
wired mode
A. Headset
B. Transmitter
C. USB charging cable
D. 3.5mm to USB audio cable - Before using the headset needs to be fully charged.
-Connect the USB charging cable to the headset and a computer to charge it.
-The red LED on headset will be on when charging.
-The red LED will go off when the headset is fully charged.
-The red LED will blink when the headset is low battery.
Wired mode
-Connect the headset to an audio device with a
3.5mm to USB audio cable.
Note:It is recommended to turn off the headset under
wired mode.
Wireless mode
-Connect the transmitter to an audio device with USB port.
-Turn on the headset.
-The green LED will blink and then stay on when the headset is connected.
-Make sure you have charged the headset.
-Make the headset as your default audio device.Refer to step “5” and “10”.
-Restart the media player.
-Connect the transmitter to another USB port.
-Check if wireless headset is set as default device. Refer to step “5” and “10”.
-Increase the microphone volume and increase the volume from the msn/skype software.
-Check if wireless headset is set as default device on msn/skype software.
-Maximum wireless range is 8m, but walls or big objects may reduce the range.
-Move other working wireless devices away from the transmitter and headset.
-This is normal behaviour. But if it is bothering, you can use the volume control of
your media playing software.
-Please push the headband to the bottom and then rotate the ear cover to flat them.
-Under wired mode, the volume control on the headset can not work. You can use the
volume control of your PC or media playing software.
Go to “Playback Devices” to configure the microphone.
Set the “Rapoo Wireless Audio” as your default device.
- Select the “Recording” tab.
- Double click on the “Microphone”.
Set the level to 100%.
Windows XP
Go to “Adjust Audio Properties” to configure the microphone.
- Set the “Rapoo Wireless Audio” as your default device.
- Go to the “Voice” tab.
Click on the “Volume” of the Voice recording.
Windows 7/ Vista
You can not rotate the
ear cover
Set the level to 100%.