3
DALI port connections / Lead colours
DA+
Red
DA -
White
Switched Permanent Live Black
Neutral
Blue
Earth
Green / Yellow
Switched Live
Brown
Small
cables
Large
cables
Cable clamps
Wiring
RJ45 ports
VFC port connections / Lead colours
VFC – N/O
Red
VFC – Common White
Permanent Live Black
Neutral
Blue
Earth
Green / Yellow
Live
Brown
Live
Neutral
Earth
Permanent
Live
6 ELV switch
input ports
2 CAN ports
Detector and ballast combinations for 200mA supply.
This
assumes that the sensor LEDs are all on, and the sensor is receiving IR communication.
4 detectors and up to 64 ballasts
5 detectors and up to 55 ballasts
6 detectors and up to 44 ballasts
7 detectors and up to 33 ballasts
8 detectors and up to 22 ballasts
9 detectors and up to 12 ballasts
10 detectors and up to 2 ballasts
In most realistic scenarios, only one LED is on at a time and only one detector is receiving IR; guidance changes to.
10 detectors up to 50 ballasts
8 detectors up to 64 ballasts
To use a higher number of detectors then ensure only one detector has walk test enabled per DALI bus.
DALI bus loading
Port 1
7 x switch inputs
Inputs C, 11, 10, 9, 8, 7, 6, 5
Port 2 & 3
CAN
Port 4 & 5
CAN + power