plate.
ATTENTION!
The motors are not of an anti-explosive type ! Do not install them where inflamable vapours
can be present !
5.4
Connecting
- Before connection, make shure that the tubing and the suction tank are free of dirt and
thread residue that could damage the pump and ist accessories.
- Only use suitable tubings, flow meter and nozzles and also adequate clamps (not included
in deliivery!).
- Do not use conical threaded joints that could damage the threaded pump openings if
excessively tightened.
Step 1: Suction hose :
- Connect the suction hose to the hose tail (3) at the inlet of the pump (1).
Step 2: Delivery hose:
- Connect the delivery hose to the hose tail (3) outlet of the pump (1) or the flow meter.
Step 3: Flow meter (optional):
- Connect the flow meter by the elbow to the outlet of the pump.
Step 4: Nozzle (optional):
- Connect the dispensing nozzle by the clamp to the delivery hose.
5.5. Dispensing
After installation the completed pump system as picture indicated, connect the power
supply and start dispensing.
ATTENTION !
It is the installer‘s repsonsibility to use tubing with adequate characteristics.Loosening of the
Connections (thereded connections, flanging, gasket seals) can cause serious ecological
and safety problem.
Check all the connections after the initial installation and on a daily basis after that. Tighten
the connections, if necessary.
6. Spare parts and accessories
3
4
5
6
7
2
1
8
Pos
.
Beschreibung Menge
1
Zapfpistole
1
2
Schelle
3
3
Füllschlauch
1
4
Schlauchnippel
2
5
O-Ring
2
6
Pumpe
1
7
Überwurfmutter
2
8
Saugschlauch
1
4
+49 (6158) 92980-0
Содержание ABP 35 G12
Страница 7: ...7 49 6158 92980 0...
