Rapid 7500 136, Инструкция по установке, эксплуатации и обслуживанию

Страница: 58 / 156

7500-S
ERIES
I
NSTALLATION
, O
PERATION AND
S
ERVICE
M
ANUAL
46 of 143
12.2 Line Pressure Test - Leak Testin g
The air t u rno v er u nit and its indi v id u al sh u t-off v al v e
m u st b e disconnected from the oil s u pply piping
systems d u ring any press u re testing of that system at
test press u res. The air t u rno v er u nit m u st b e isolated
from the oil s u pply piping system b y disconnecting
the s u pply and ret u rn pipe from the p u mp. Only u se
air or nitrogen to leak test the piping.
FIGURE 29: Suntec Two Step Pump
FIGURE 30: Webster 3450 RPM Blower Motor
Driven Oil Pump
12.3 Pressure Test Ports
There are press u re test ports located on the bu rner's
p u mp. The test ports are a v aila b le to meas u re the
nozzle press u re and b ypass press u re (if so
eq u ipped). See Page 46, Figure 29 through Page
46, Figure 30 . The S u ntec p u mp is typically u sed for
On/Off and High/Lo w /Off bu rners u p to 23 GPH (87.1
LPH). The We b ster p u mp is typically u sed for On/Off
and High/Lo w /Off bu rners a b o v e 23 GPH (87.1 LPH)
and all f u lly-mod u lating bu rners.
12.4 Oil Manifolds
FIGURE 31: FM or XL-Compliant Manifold for Air Turnover Units with Suntec Pump and On/Off Burner