One to five RFID tags can be programmed
into the safe.
6
How to Program Your
RFID Tags
Your RAPiD
®
Safe includes three (3) styles
of RFID tags, including:
• 1 Wristband
• 1 Key Fob
• 2 Decals
*Additional styles and sizes can be
purchased separately.
The RAPiD
®
Safe can store up to 5 tags.
To program these tags:
1. Open the RAPiD Safe with either the
key or a previously programmed RFID
tag or key code. (The key code safe
does not ship with pre-programmed
RFID tags. A RFID tag must be
programmed to work with this safe.)
2. Locate the red program button.
Press and release the button to begin
programming a RFID tag. The first
available program location will begin
to blink.
3.
Hold the RFID tag within 1"
of the
illuminated RFID reader area on the
top of the safe lid. If the programming
was successful, the safe should
beep two times and the available slot
should go from blinking to solid red for
approximately ten seconds.
NOTE:
If the user attempts to
program a RFID tag that is already
stored into the safe, the safe will
beep three times and the RFID tag
will not be programmed into the
duplicate slot. The RFID tag can only
be programmed into one location.
16-HMC-0113 Instructions Rapid Safes 2600KP-2700KP - INSIDE PGS-4A.indd 6
8/25/16 4:14 PM
