Rapid Tool Australia ERB-16, Руководство пользователя

Страница: 3 / 6

Machine Head
Bend Module
Additional Bend Module
Additional Bend Die
Bend Module Bolt
Machine Handle
Release Lever
Oil Plug
Reference Bolt
Dabber
Pump Case
Motor Housing
Brush Caps
Note: Reference bolt can be used as a reference
point against bend module position during bending.
Installing Additional Bend Module and Bend Die
1. Disconnect from power supply.
2. Unfasten bend module bolt and remove existing bend module.
3. Fit additional bend module over dabber and securely fasten additional bend module bolt
(bolt must line up with groove in dabber).
4. Fit additional bend die over existing machine head and securely fasten additional bend die bolt.
MODEL ERB-16
Input Voltage -Single Phase* 220-240V AC ~50Hz 110-120V AC ~60Hz
Power Consumption 850W (220-240V) 1000W (110-120V)
Net Weight 15kg
Dimensions (cm) 60L x 17W x 20H
Bending Range 4-16mm**
Machine Specifications
* Check machine label to determine correct power supply.
**Refer to machine model data sheet for maximum tensile strength/grade.
Machine Parts