Rapid Engineering BH-40 Скачать руководство пользователя страница 1

Страница: 1 / 68

WARNING

FOR YOUR SAFETY

If you smell gas:

1.  Open windows.
  2.  DO NOT try to light any appliance.
  3.  DO NOT use electrical switches.
  4.  DO NOT use any telephone in

your building.

  5.  Extinguish any open flame.
  6.  Leave the building.
  7.  Immediately call your local gas

supplier after leaving the building.

Follow the gas supplier’s

instructions.

8. If you cannot reach your gas

supplier, call the Fire Department.

Fire Hazard

Keep all flammable objects, liquids and
vapors the minimum required clear-
ances to combustibles away from
heater.

Some objects will catch fire or explode
when placed close to heater.

Failure to follow these instructions can
result in death, injury or property
damage.

WARNING

Installation must be done by a contractor qualified
in the installation and service of gas-fired heating
equipment or your gas supplier.

Improper installation, adjustment, alteration, service
or maintenance can result in death, injury or
property damage. Read the Installation, Operation
and Service Manual thoroughly before installing or
servicing this equipment.

Installer

Please take the time to read and understand

these instructions prior to any installation.

Installer must give a copy of this manual to the owner.

Owner

Keep this manual in a safe place in order to provide

your serviceman with necessary information.

Rapid Engineering LLC

1100 Seven Mile Road NW
Comstock Park, MI 49321
Telephone: +1.616.784.0500
Fax: +1.616.784.1910
Toll Free: 800.536.3461

www.rapidengineering.com

P/N RPBH170101NA Re

. B 02/12

RAPID

™

The Economical Unitary

Infrared Heater

Installation, Operation &

Service Manual

BH-40
BH-60
BH-

BH-100

BH-115

BH-125
BH-140
BH-150
BH-175

BH-200

Содержание BH-40





































































Результаты поиска

Содержание BH-40

Отзывы:

Похожие инструкции для BH-40

Бренды по названию

Популярные бренды

Rapid Engineering BH-40, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание BH-40

Отзывы:

Похожие инструкции для BH-40

Бренды по названию

Популярные бренды