background image

Visit us at 

www.rapala.ca

4

Operator's Manual

RAPALA

®

 Power Ice Auger

IMPORtANt SAfEty PRECAUtIONS:

•  The  ice  blades  are  very  sharp.  Use  extreme  caution  when 

drilling a hole or replacing the blades. put blade guard on 

after each use.

•  Do not carry the unit between holes with the engine running.
•  The  auger  should  not  rotate  when  the  engine  is  idling.  If 

it does rotate when engine is idling, contact an Rapala-

authorized service center for instructions. 

•  Always keep hands, feet, hair and loose clothing away from 

any moving parts on engine and auger.

•  Do not allow children to operate this unit! Do not allow 

adults to operate the unit without proper instruction.

•  Do not operate any power equipment under the influence of 

alcohol or drugs.

•  Keep all screws, nuts and bolts tight.
•  Engine should be turned off and cool, spark plug wire must be 

removed from spark plug before any repairs are attempted.

•  Temperature of muffler and nearby areas may exceed 150

º

 F 

(65

º

 C). Avoid these areas.

•  Never run engine indoors or in an enclosed area. Engine ex-

haust contains carbon monoxide, an odorless and deadly gas.

•  If the auger becomes unturnable in a hole, turn engine off 

and allow to cool before attempting to remove it manually. 

ENGINE SAfEty PRECAUtIONS

Preventing Carbon Monoxide Poisoning

•    Never try to ventilate engine exhaust indoors. Carbon 

monoxide can reach dangerous levels very quickly.

•    Never run engine outdoors where exhaust fumes may be 

pulled into a building.

•    Never run engine outdoors in a poorly ventilated area where 

the exhaust fumes may be trapped and not easily taken away. 

(Examples include: in a large hole or areas that are covered 

by snow drifts.)

•    Never run engine in an enclosed or partially enclosed area. 

(Examples include: buildings that are enclosed on one or 

more sides, inside shelters, garages or basements.)

•    Always run the engine with the exhaust and muffler pointed 

in the direction away from the operator.

•    Never point the exhaust muffler towards anyone. people 

should always be many feet away from the operation of the 

engine and its attachments.

• 

Do not change the engine governor settings or over-speed 

the engine.

• 

Stay away from rotating parts. place protective covers over 

rotating parts.

 WARNING

DO NOt ALtER/MODIfy ENGINE:

NEVER ALtER OR MODIfy tHE ENGINE fROM tHE 

fACtORy. SERIOUS INJURy OR DEAtH MAy OCCUR If 

ENGINE IS MODIfIED OR ALtERED.

WHEN WORkING ON OR REPLACING PARtS fOR tHE 

ENGINE OR PRODUCt, yOU MUSt ALWAyS DISCON-

NECt SPARk PLUG WIRE fROM tHE SPARk PLUG AND 

kEEP It AWAy fROM tHE SPARk PLUG.

ALWAyS WEAR HEARING PROtECtION WHILE OPER-

AtING ENGINE.

PLEASE DO NOt StARt yOUR ICE AUGER UNtIL yOU 

HAVE READ tHE PREVIOUS SECtION Of tHIS MANU-

AL. If yOU HAVE READ tHESE, fOLLOW tHE StEPS ON 

tHE NExt PAGE tO StARt yOUR ICE AUGER.

NEVER StORE ENGINE WItH GAS IN tHE tANk 

 

INDOORS. fUEL AND fUEL VAPORS ARE HIGHLy 

fLAMMABLE. 

NEVER MIx fUEL AND OIL DIRECtLy IN ENGINE 

GAS tANk. USE ONLy NON-MEtAL, PORtABLE fUEL  

CONtAINERS APPROVED By tHE UNDERWRItER’S 

LABORAtORy (U.L.) OR tHE AMERICAN SOCIEty fOR 

tEStING & MAtERIALS (AStM).

HANDLING AND fILLING tHE ENGINE WItH fUEL 

MUSt ALWAyS BE DONE By AN ADULt. 

ALWAyS HANDLE fUEL IN A WELL VENtILAtED AREA, 

OUtDOORS, AWAy fROM fLAMES OR SPARkS.

 WARNING

ENGINES GIVE Off CARBON MONOxIDE, AN ODOR-

LESS, COLORLESS, POISONOUS GAS.  CARBON MON-

OxIDE MAy BE PRESENt EVEN If yOU DO NOt SMELL 

OR SEE ANy ENGINE ExHAUSt. BREAtHING CAR-

BON MONOxIDE CAN CAUSE NAUSEA, fAINtING OR 

DEAtH, IN ADDItION tO DROWSINESS, DIZZINESS 

AND CONfUSION.  

If yOU ExPERIENCE ANy Of tHESE SyMPtOMS, SEEk 

fRESH AIR AND MEDICAL AttENtION IMMEDIAtELy.  

StARt AND RUN ENGINE OUtDOORS.  DO NOt StARt 

OR RUN ENGINE IN AN ENCLOSED AREA, EVEN If 

DOORS OR WINDOWS ARE OPEN.

• 

Do not use engine around dry brush, cloth rags, or other 

flammable materials.

• 

Always keep materials and debris clear of muffler guard 

and other hot engine parts.

Содержание VORTEX















Отзывы: