![Ransomes MT503 Скачать руководство пользователя страница 49](http://html1.mh-extra.com/html/ransomes/mt503/mt503_safety-operation-and-maintenance-manual-parts-list_3801636049.webp)
en-49
CONTROLS 6
The default, minimum and maximum allowable speeds are shown in the table below:
Note all speeds can be incremented by 1 km/h.
6.5.7 FLAIL \ CYLINDER MODE _____________________________________________
The MT503 cutting system is capable of providing power to both Magna 250 cutting cylinders and MT Series flail
units. To ensure that these run at their intended speed it is important to ensure the machine’s cutting system is
configured correctly.
The cutting system mode can be selected via the display as follows:
1. Press
Button 4
twice to enter the
Main Menu
2. Use
Button 3
to scroll to
Settings
followed by
Button 4
to enter the
Settings Menu
3. Use
Button 3
to scroll to
PIN
followed by
Button 4
to enter the
Enter
PIN
page
4. Enter the Owner PIN (default 1001) to enter the
PIN Menu
page
5. Use
Button 3
to scroll to
Flail \ Cylinder Mode
followed by
Button
4
to enter the
Flail \ Cylinder Mode
settings screen
6. Use
Button 2 & 3
to select the required mode as appropriate followed
by
Button 4
to set
7.
Button 1
is then used to exit to the
Main Menu
or
Home Screen
6.5.8 LIFT ON REVERSE___________________________________________________
The cutting units will automatically lift to the Cross Cut position while mowing and the vehicle is moved in reverse.
Lift On Reverse can be disabled via the display as follows:
1. Press
Button 4
twice to enter the
Main Menu
2. Use
Button 3
to scroll to Settings followed by
Button 4
to enter the
Settings Menu
3. Use
Button 3 to
scroll to
PIN
followed by
Button 4
to enter the
Enter
PIN
page
4. Enter the
Owner PIN
(default 1001) to enter the
PIN Menu
page
5. Use
Button 3
to scroll to Lift On Reverse followed by
Button 4
to
enter the
Lift On Reverse
settings screen
6. Use
Button 2 & 3
to select either
Enabled
or
Disabled
as neces
-
sary, followed by
Button 4
to set
7.
Button 1
is then used to exit to the Main Menu or Home Screen
Default
(km/h)
Min
(km/h)
Max
(km/h)
Transport
Forwards
25
1
25
Reverse
8
1
13
Mow
Forwards
13
1
16
Reverse
6
1
13
Creep
Forwards
8
1
10
Reverse
5
1
10
Содержание MT503
