QUICK START GUIDE
en-21
VISUAL DISPLAY
RESET DEFAULT PARAMETERS
The machine will have factory set defaults.
You can reset to factory settings by Using the
PIN Menu
Buttons 2 and 3
to
arrow up and
down
,
and
Button 4
to
select Set Default
Parameters. Press arrow to confirm.
BACKLAPPING
To enable backlapping,
1.Start the machine. Reduce Engine
Speed to Minimum Low Idle.
2.From the home screen, Navigate
through screens: MAIN MENU >
SETTINGS > PIN.
3.Enter Pin
“1001”
and confirm with
Button 4.
4.Scroll to Enable and select using
Button 4
. Text will change to Green
once selected.
5.Exit the menu’s using
Button 1
returning to Home Screen. The Cutting
Indication symbol will have changed to
the Backlap symbol.
6.Lower Cutting units and Engage Cutters
as normal. The Units will now be rotating
in reverse direction to allow backlapping
operation.
7.The Backlap function will automatically
default to Off for normal cutting
operation when Ignition Key Switch is
turned off. Alternatively you can disable
by stopping the Cutters using PTO
Switch and repeating the steps 2 to 4
and selecting Backlap Disable.
Set Default Parameters
Press To Confirm Set
To Default Parameter Values
Set Default Parameters
Press To Confirm Set
To Default Parameter Values
Are You Sure?
Yes
No
Backlapping
Backlap Enable
Backlap Disable
