Ransomes 933308G, Руководство оператора

Страница: 18 / 28

18
EC
Hydro
Midsize
HEIGHT OF CUT
Speed Control Bar
The speed control bar F is held by friction pads. If
the setting will not hold, tighten knob E to increase
friction on speed control bar F .
PARKING BRAKE - Apply parking brakes and open
the bypass valves on the hydraulic pumps. Try to
push the machine forward. If wheels rotate, adjust
brakes as follows.
TO ADJUST :
1. Remove the hairpin cotter A from the brake rod
at the brake lever C as shown.
2. Slide the brake rod out of the brake lever and
turn the rod in or out of the brake swivel B as
needed.
NOTE : The brake should initially be adjusted so
that the brake rod extends through swivel
B 1-1/4" as shown. If more brake pressure is
required adjust as necessary.
3. Reassemble brake rod to the brake lever using
hairpin A removed in Step 1.
4. Apply parking brakes and try to push the machine
forward. If wheels rotate, readjust brakes.
5. Close bypass valves on the hydraulic pumps.
NOTE: Make all adjustments with the engine shut off, spark plug wire disconnected and mower drive
disengaged.