The oval or v-clamp seat clamp system will release enough to slide with deployment of the QR handle. For seat back tilt adjustments, pull the pins
from the sprint brace tubes. When the seat is positioned as desired, clamp with the QR handle. If the sprint brace tube pins have been removed,
replace them before mounting the bike. Both oval and v-clamps can be adjusted for more clamping pressure by tightening the QR. The top adjust-
ment of the clamp should be set to allow the seat to slip over the shoulder bolts but not move side to side. Use (2) 6mm allan wrenches to adjust.
Now, with the brakes still applied and sitting back in the seat, place the ball of your foot on the pedal, extend your leg fully and apply pressure. In
this position, which represents the bottom power of your stroke, your knee should be slightly bent.
At first you may prefer your seat upright. After gaining riding experience, you may want to try a more reclined position. Minor adjustments are
made by pulling the pins from the sprint brace tubes and tilting the seat to the position you want.
V-Clamp
Oval Clamp
Position 1
Position 2
Содержание Crank Forward
