Rankin BF-1000 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 26

Rankin BF-1000 Скачать руководство пользователя страница 6

2 SAFETY

SAFETY ALERT SYMBOL

Why is SAFETY important to you?

The Safety Alert symbol identifies
important safety messages on the
Clamp-On Bucket Forks and in the
manual. When you see this symbol,
be alert to the possibility of personal
injury or death. Follow the instruc-
tions in the safety message.

This Safety Alert symbol means
ATTENTION! BECOME ALERT!
YOUR SAFETY IS INVOLVED!

Accidents Disable and Kill
Accidents Cost
Accidents Can Be Avoided

3 Big Reasons

WARNING

-

Indicates a potentially hazard-

DANGER

-

Indicates an imminently hazardous

CAUTION

-

Indicates a potentially hazardous

situation that, if not avoided, may
result in minor or moderate injury.
It may also be used to alert against
unsafe practices.

ous situation that, if not avoided,
could result in death or serious
injury, and includes hazards that are
exposed when guards are removed.
It may also be used to alert against
unsafe practices.

situation that, if not avoided, will
result in death or serious injury.
This signal word is to be limited to
the most extreme situations typi-
cally for machine components
which, for functional purposes,
cannot be guarded.

SIGNAL WORDS:

Note the use of the signal words DANGER,
WARNING and CAUTION with the safety
messages. The appropriate signal word for
each message has been selected using the
following guide-lines:

If you have any questions not answered in this manual or require additional copies or the manual is
damaged, please contact your dealer.

2

SI NO LEE INGLES, PIDA AYUDA
A AIGUIEN QUE SI LO LEA PARA
QUE LE TRADUZCA LAS
MIDIDAS DE SEGURIDAD.

«
...
4
5
6
7
8
...
»

Содержание BF-1000



























Отзывы:

Нет отзывов