13
TF1038-014515 English
20180510 V.1
11. When transporting or storing LP cooker without tank attached,
hook regulator onto burner or cooker stand to prevent damage
to regulator.
12. Attach the Handle (P) by inserting Bolt (5) through Basket (O).
Then tighten Washers (7) and Nuts (6).
Using Your Thermometer
Check the thermometer before each use by inserting into a pot of
boiling water and ensuring that it registers approximately 212°F +/-
20°F (100°C +/- 10°C). If it does not function properly, obtain a
replacement thermometer specified by the manufacturer before
using the appliance.
Prior to lighting, position thermometer clip so that at l
east 2.75” of
thermometer tip is submerged in oil. Reposition thermometer as
necessary to cook. Continue to use thermometer until burner is
turned off.
Using Your Vessel
The vessel is equipped with a spigot which allows oil / water
removing from the vessel.
Following is the procedure of using spigot properly:
1. Make sure the Spigot and Cap End are fully closed before
cooking.
2.
After cooking, wait for vessel is cool down fully. Don’t touch the
spigot during cooking or the while vessel is hot.
3. Unscrew the Cap End.
4. Turn counter-
clockwise to “OPEN” the spigot.
5. The oil / water will flow out through the spigot.
After vessel cleaning, the Cap End must be tightly screwed and
turned clockwise to “Close” the spigot.
Spigot
Cap End
Cap End
