background image

                                                                             

  32 of 32 

                                                                 

20170126-Ver.1.0

 

LIMITED WARRANTY 

 

1. 

Manufacturer warrants this Product to be free from defects in workmanship and materials after 
correct assembly and under normal and reasonable home use for the periods indicated below 
beginning on the date of purchase, PROVIDED claims are submitted, in writing, with proof of 
purchase. 

 

                 

Scope Of Coverage          Period Of Coverage         Type Of Failure Coverage 

Burners 5 

years from date of purchase

Perforation, manufacturing, and 
material defects only 

Fire box and lid 

2 years from date of purchase

All remaining parts 

1 year from date of purchase

 

2. 

If any part of this item fails because of a manufacturing defect within the Limited Warranty Period, 
Manufacturer offers to replace such part(s) provide that such parts have not been improperly 
repaired, altered, or tampered with or subject to misuse, abuse or exposed to corrosive conditions. 
This Limited Warranty is, however, subject to certain limitations, exclusions, time limits and 
exceptions (Hereinafter “Conditions”) as listed below. Read these Conditions carefully. 

3. 

This Limited Warranty shall be limited to the replacement or repair of any part(s) which Manufacturer 
determines, after reasonable examination, to have been defective at the time of manufacturing and 
manufacturer’s obligation(s) shall be limited to replacement, if any, of defective part(s) which shall 
be shipped at Original Purchaser’s expense to Original Purchaser’s designated shipping address. 

4. 

This Limited Warranty is given to and covers the 

ORIGINAL PURCHASER ONLY 

and such 

coverage terminates from the date of purchase which indicates above at point 1.

 

5. 

DAMAGE LIMITATION WARNING: 

IN NO EVENT SHALL MANUFACTURER BE LIABLE FOR 

ANY INCIDENTIAL OR CONSEQUENTIAL DAMAGES, INCLUDING (BUT NOT LIMITED TO) 
LOSS OF USE OF THE PRODUCT, LOSS OF TIME, LOSS OF FOOD, INCONVENIENCE, 
EXPENSES FOR TRAVEL, TRANSPORTATION LODGING EXPENSES, LOSS BY DAMAGE TO 
PERSONAL PROPERTY OR LOSS OF INCOME, PROFITS OR REVENUE. 

6. 

MANUFACTURER’S OBLIGATION:

 Manufacturer’s liability shall be limited to the delivery of a good, 

merchantable Product and, if necessary, the repair or replacement, at manufacturer’s option, of any 
defective part or unit. 

7. 

TRANSFER LIMITATIONS:

 This Limited Warranty is not assignable or transferable. It covers only 

the original purchaser. 

8. 

RESERVED RIGHT TO CHANGE:

 Manufacturer reserves the right to make changes or 

improvements to products it produces in the future without imposing on itself any obligations to 
install the same improvements in the products it has previously manufactured. 

9. 

This Limited Warranty gives the Original Purchaser specific legal rights but there may be other rights 
which vary by jurisdiction. 

10.  This warranty does not cover the following items: 

  Chips or scratches on porcelain or painted surfaces. 

  Rust or corrosion is not deemed a manufacturing or materials defect. 

  Discoloration or loss of paint due to handling during assembly, heat or cleaning products. Paint 

may require touch up. 

  Stainless steel discoloration or corrosion. 

 

Consumables such as batteries.

 

 

IF CUSTOMER SERVICE BECOME NECESSARY:

 

1. 

The Original Purchaser is responsible for shipping and handling charges of the returned item(s) 
and replacement parts, if any. 

2. 

All parts to be replaced will need to be shipped before replacement items will be sent. 

3. 

Follow the Customer Service Representative’s instructions exactly. If a return is necessary, it must 
be packed carefully and shipped prepaid.

 

 

Should you encounter any problem, 

CALL US FIRST. 

Do not return product to the store. 

WE CAN HELP. 

 

For assistance, contact customer service at 

[email protected]

 

or at (888) 837-1380, Mon to Fri, 8:00am – 5:00pm Pacific Standard time 

 

Manufacturer information 

Rankam (China) Manufacturing Company Limited 

Address: 18/F,. New Lee Wah Centre, 88 Tokwawan Road, Kowloon, Hong Kong.

 

Содержание GR2264401-GS-00

































Отзывы: