Rangevision PRO, Инструкции по настройке и калибровке

Страница: 22 / 31

If you are setting up the 4th scanning area, it may be necessary to decrease the
brightness of lines and stripes due to the close distance to object. In the menu
Brightness setup decrease the brightness value, as shown in the figure. Brightness value
of lines is approximately 2 times greater than the brightness of the stripes. Visually lines
and stripes must be the same brightness.
Upon completion of all scanner adjustments, you should fulfill the following conditions:
● cameras are pointed to one point, located at the working distance from the
scanner;
●
cameras and the projector are focused on the same working distance;
● at the standard values of electronic exposure (30-60) images from the
cameras are not excessively bright and not too dark;
● all the adjustment and the clamping screws are tightened.
22