Connect the USB receiver to an unused USB port on your computer or to a port on an external USB hub. The computer
will prompt “found new hardware”. This indicates that the Receiver is connected and functioning.
STEP 2:
Remove the battery compartment lid behind the keyboard and insert two AAA batteries as shown below. Please be
careful not to load the battery incorrectly. There are guide marks inside the compartment to make sure they are in the
right direction.
Attention: If the battery voltage is low, the red LED will be lighted.
NOTES :
A.
If you have completed the above installation steps, but the keyboard still does not function, the receiver and
transmitter have lost auto-recognition and must be reconnected. Repeat the recognition process until the receiver and
keyboard are linked. Otherwise, please turn to a support technician for help.
B.
The batteries provided will last many hours of use, but if the keyboard begins to respond slowly, the batteries should
be replaced. Alkaline, Lithium Ion or rechargeable batteries may be used as replacements.
HOT KEYS GUIDE:
Following is a guide showing all the hot keys that are preset in this keyboard.
Web/Home
Sleep
Mute
Volume -
www.ranger-technology.com
