Indication of Blue Led Light
Troubleshooting
You can solve your problems from this section if there is no sound comes out from your
bluetooth headphones.
◎
Make sure the Ranger Bluetooth Audio 2-way splitter is power on
◎
Make sure the 3.5mm audio cable is correctly and firmly connected to the Ranger
Bluetooth Audio 2-way splitter.
◎
Make sure that the audio source is correct and with audio out.
◎
Make sure the volume of the audio out is set to a comfortable listening level.
◎
Make sure this device is not fully blocked by other items , do not block the bluetooth
antenna and you are within the operating distance range.
If there is no sound comes out from both the headphones , please unplug and replug
again the Ranger Bluetooth Audio 2-way splitter from the TV. Wait for a short while for it
to get connected.
SAFETY WARNINGS
◎
Keep this Ranger Bluetooth Audio 2-way splitter away from water .
◎
Clean with dry cloth.
◎
Unplug the Ranger Bluetooth Audio 2-way splitter before cleaning.
◎
Install the Ranger Bluetooth Audio 2-way splitter far away from heat sources.
◎
Use only the accessories that comes with it.
◎
Unplug the Ranger Bluetooth Audio 2-way splitter if it was unused for a long time.
***aptX
®
software is copyright CSR plc or its group companies. All rights reserved.
The aptX
®
mark and the aptX logo are trademarks of CSR plc or one of its group
companies and may be registered in one or more jurisdictions.
4
Indication Meaning
Description
Flashing on / off
Power on /
Pairing
Searching the device under pairing
mode
Permanently lighted
up
Connected
Device and main unit are connected
