Ranger RCI-2950, Руководство по обслуживанию

Страница: 5 / 154

17. SCAN BUTTON:
This is used to scan frequencies in each band segment. The OPERATION segment of this manual provides
detailed information on using the SCAN control.
18. MEMORY BUTTON:
This button is used to program memory channels. Detailed information on how to use this control is provided in the OPERATION
section of this manual.
19. ENTER BUTTON:
This is used to program frequencies in memory. See the OPERATION section of this manual for more information on using this
control.
20. LOCK BUTTON :
This button is used to lock a selected frequency. Press it activate the switch. In this position, it disables the Frequency Selector
Control, up/down buttons on the front control panel, or remote up/down buttons on the microphone. Repressing the switch will
unlock the frequency.
21. UP/DOWN SELECTORS:
These buttons are used to move frequency upward or downward to select a desired frequency.
22. METER:
This meter indicates received signal strength, transmitter RF output power and SWR level.
23. LCD DISPLAY:
The LCD displays the frequency selected, functions and memory channel.
24. MIC JACK:
Accepts 6 pin female connector with a type Philmore T6160 and Calrad 30445 to be connected.