4.2 Using Bluetooth
1). Set / Push the switch to the Bluetooth position - LED will flash blue quickly.
2). Turn on the Bluetooth of your mobile phone or music device, search for
Bluetooth device.
3). Select “Ranger 288” in the list of Bluetooth devices, then follow the steps and
enter pin code 0000 to pair.
4). Once paired and connected, LED will flash blue once every 15 seconds. The
Bluetooth speaker will be automatically connected to your mobile phone or
music device whenever you turn the Bluetooth speaker on again and the
device must be within the operating range.
NOTE:
1). When losing connection, the speaker will automatically switch itself off after
30 minutes, please restart it again when connect.
2). When the battery power is low , LED will not shown up if you switch to Blue-
tooth side. But it may work fine on the Line in side. Please charge it.
3). Do not play music at excessive levels as may result damage to the equipment
.
