
- 25 -
7.5 B
attery
S
tatuS
Over 9v, normal operation:
System voltage over 9v
is required for normal operation.
Over 7.5v, daylight use only:
If the system voltage
is between 9v and 7.5v the camera will operate only
during daylight hours. In this case the battery indicator
will flash twice when darkness falls to indicate the
camera is entering hibernation. When daylight returns
the camera will reactivate.
Less than 7.5v, no operation:
The battery indicator
will flash ten times and the unit will switch off.
Batteries must be replaced.
8. v
IeWIng
I
MageS
and
M
ovIeS
8.1 c
onnect
the
caMera
to
a
pc
Slide the power switch to ON.
1.
Enter
2.
Setup Mode
(see section 6).
Connect your camera to a PC using the USB
3.
cable provided. The PC will recognize the
new device and the LCD will display “MASS
STORAGE”.
Images and videos stored on the SD card can
4.
now be viewed, copied, moved and deleted.
8.2 r
ead
I
MageS
u
SIng
a
c
ard
r
eader
Depress the SD card and gently pull out the card.
1.
Insert SD card into the card reader (not included).
2.
Read images and videos from the card reader as
3.
normal.