Ranger Products RML-1100 Скачать руководство пользователя страница 2

 

1100 POUND CAPACITY

MOTORCYCLE / ATV LIFT

This instruction manual has been prepared especially for you. 

Your new lift is the product of over 35 years of continuous research, testing and development.

 It is the most technically advanced lift on the market today.

READ THIS ENTIRE MANUAL BEFORE INSTALLATION & OPERATION BEGINS.

 

PRODUCT WARRANTY

Ranger Motorcycle Lifts are warranted for one year on equipment structure, to be free of defects in material and work-
manship. Power units, hydraulic cylinders, and all other assembly components such as turnplates, slip plates, cables, 
chains, valves, switches etc. are warranted for one year against defects in material or workmanship under
normal use. Ranger Products Inc. shall repair or replace at their option for the warranty period those parts returned to 
the factory freight prepaid which prove upon inspection to be defective. Ranger Products Inc. will pay labor costs for the 
first 12 months only on parts returned as previously described. 

The warranty does not extend to...

 

defects caused by ordinary wear, abuse, misuse, shipping damage, improper 

 

installation, voltage or lack of required maintenance;

   

damages resulting from purchaser’s neglect or failure to operate products in accordance with  

 

 

 

 

instructions provided in the owner’s manual(s) and/or other accompanying instructions supplied;

 

normal wear items or service normally required to maintain the product in a safe operating condition;

 

any component damaged in shipment;

 

other items not listed but may be considered general wear parts;

 

damage caused by rain, excessive humidity, corrosive environments or other contaminants. 

THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT 

FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT 

MAY RESULT FROM ANY DEFECT, FAILURE, OR MALFUNCTION OF A RANGER PRODUCTS INC. PRODUCT OR 

THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.

WARRANTY IS NOT VALID UNLESS

WARRANTY CARD IS RETURNED.

IMPORTANT NOTICE!

These instructions must be followed to insure proper installation and operation of your lift. 

Failure to comply with these instructions can result in serious bodily harm and void product warranty. 

Manufacturer will assume no liability for loss or damage of any kind, expressed or implied resulting 

from improper installation or use of this product. 

PLEASE READ ENTIRE MANUAL PRIOR TO INSTALLATION!

Содержание RML-1100









Отзывы: