background image

PLEASE READ THE ENTIRE CONTENTS OF THIS MANUAL PRIOR TO 
INSTALLATION AND OPERATION. BY PROCEEDING YOU AGREE THAT YOU 
FULLY UNDERSTAND AND  COMPREHEND THE FULL CONTENTS OF THIS 
MANUAL. FORWARD THIS MANUAL TO ALL OPERATORS. FAILURE TO 
OPERATE THIS EQUIPMENT AS DIRECTED MAY CAUSE INJURY OR DEATH. 

Rev. A2 – October 2020 

P/N 5900185

INSTALLATION AND OPERATION MANUAL

SHIPPING DAMAGE CLAIMS

When this equipment is shipped, title passes to the pur-

chaser upon receipt from the carrier. Consequently, 

claims for the material damaged in shipment must 

be made by the purchaser against the transporta-

tion company at the time shipment is received.

BE SAFE

Ranger™ Floor Jacks are designed and built 

with safety in mind. However, proper training and 

thoughtful operation on the part of the operator can 

increase your overall safety. DO NOT operate or 

repair this equipment without reading this manual 

and the important safety instructions shown inside.

1645 Lemonwood Dr.

Santa Paula, CA. 93060, USA

Tel: 1-805-933-9970

Toll Free: 1-800-253-2363

Fax: 1-805-933-9160

www.rangerproducts.com

Aluminium Quick Jack 

Model: RFJ-4000AL

Keep this operation manual near the 

machine at all times. Make sure that 

ALL USERS  read this manual .

Содержание RFJ-4000AL









Отзывы: