Ranger design 1530-NSX, Руководство по установке

Страница: 12 / 20

For technical support, contact us at 1-800-565-5321 1530-NSX Installation Guide
| REV. D1 | Page
12
1.2.9
Loosen the pre-assembled hardware on the ladder clamp hasps, slide the hasps on the ski to the
position shown below, and tighten the nuts.
1.2.10
Slide 3pcs. of carriage bolts on the rear end of the each ski, then attach end plugs on
both ends of the skis.
HARDWARE USED
4×
hardware is pre
-
assembled
.
#98-123 Lock Washer
#98-117 Flat Washer
#90-487 Carriage Bolt 5/16" × 3/4"
#94-105 Hex Nut
TOOLS
q
Cordless Impact
q
1/2" Socket
q
Tape Measure
q
Marker
HARDWARE USED
6×
#90-491 Carriage Bolt
5/16" × 1" SS304
TOOLS
q
Mallet
end plug
end plug
end plug
15 - 1/2"