Ranger design 1525-PC Скачать руководство пользователя

Страница: 20 / 22

For technical support, contact us at 1-800-565-5321

1525-PC Installation Guide

| REV. B2 | Page

2.2.5

Ladder Rack adjustment for stepladder.

NOTE: •

The same procedure applies to the hook located on the adjustable front crossbow. The position

of the adjustable front crossbow must be adjusted according to the length of the stepladder.

•

The ladder cannot extend beyond the rear bumper of the vehicle.

NOTE:

Make sure all the bolts are

tightened after adjusting.

The inner ladder side support must
be adjusted according to the width
of the step ladder.

Be sure that the extrusion of the
step ladder is on the ladder side
support.

IMPORTANT:

• After installation is complete, cut the track plug underneath the front crossbow to fill all the

unused space.
• Place the ladder rack warning label on a visible area, recommended on a partition.

Содержание 1525-PC























Результаты поиска

Содержание 1525-PC

Отзывы:

Похожие инструкции для 1525-PC

Бренды по названию

Популярные бренды

Ranger design 1525-PC, Руководство по установке

Результаты поиска

Содержание 1525-PC

Отзывы:

Похожие инструкции для 1525-PC

Бренды по названию

Популярные бренды