9
ArtNo.320-0010 Flat & drop shelves
�
�
ArtNo.320-0013 Removing the shelf 3
ArtNo.320-0014 Handyrack on LH door
ArtNo.320-0015
Fitting the Handyack 1
Fig.2-32
Fig.2-33
ArtNo.320-0016
Fitting the handyrack 2
Fig.2-34
Accessories
Oven Shelves – Left-hand (Main) Oven
In addition to the flat shelves
(Fig.2-25)
, some models are
supplied with a drop shelf
(Fig.2-26)
. The drop shelf increases
the possibilities for oven shelf spacing.
The oven shelves can be easily removed and refitted.
Pull the shelf forward until the back of the shelf is stopped by
the shelf stop bumps in the oven sides
(Fig.2-27)
.
Lift up the front of the shelf so the back of the shelf will pass
under the shelf stop and then pull the shelf forward
(Fig.2-28)
.
To refit the shelf, line up the shelf with a groove in the oven
side and push the shelf back until the ends hit the shelf stop.
Lift up the front so the shelf ends clear the shelf stops, and
then lower the front so that the shelf is level and push it fully
back
(Fig.2-29)
.
Oven shelves – Right-hand (Tall) Oven
The tall oven is supplied with four flat cooking shelves
(Fig.2-30)
, and a plate warming shelf
(Fig.2-31)
.
When using the tall oven, you can cook on all four shelves at
the same time, but make sure that they are well spaced out
allow the hot air to circulate.
The Handyrack (Main Oven)
The Handyrack
(Fig.2-32)
fits to the left-hand oven door
only. Food cooking on it is easy to attend to, because it is
accessible when the door is open.
The maximum weight that can be held by the Handyrack is
5.5kg (12lb). It should only be used with the supplied roasting
tin, which is designed to fit the Handyrack. Any other vessel
could be unstable.
Additional roasting tins are available from our cookware
collection – Part Code RM027.
It can be fitted at two different heights. One of the oven
shelves must be removed and the other positioned to suit.
When the Handyrack is used in its highest position, other
dishes can be cooked on the bottom shelf position or base of
the oven.
When the Handyrack is used in its lowest position, other
dishes can be cooked on the second shelf position or base of
the oven.
To fit the Handyrack, locate one side of it on the door bracket
(Fig.2-33)
.
Then spring the other side out to clip it onto the other
bracket
(Fig.2-34)
.
Fig.2-26
ArtNo.320-0011 Removing the shelf 1
ArtNo.320-0012 Removing the shelf 2
Fig.2-27
Fig.2-28
Fig.2-29
A - Flat shelf, B - Drop shelf
ArtNo.324-0002 Oven shelf
ArtNo.324-0010 Plate warming shelf
Fig.2-30
Fig.2-31
