Rangemaster RMB60HPNGFGL, Руководство пользователя

Страница: 18 / 32

WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
14
Check in the ‘
Technical Data
’ section at the back of the
instructions that the cooker is convertible to the gas you
want to use.

This conversion must be performed by a suitably
competent person, in accordance with these
instructions and with the local supply company
requirements.

Failure to convert the appliance correctly could
invalidate any warranty or liability claims and lead
to prosecution.

The conversion instructions must be used in
conjunction with the rest of the appliance
instruction, in particular for information on
Standards, cooker positioning, connection, hose
suitability, etc.

When servicing or replacing gas-carrying
components, disconnect from the gas before
starting, and check that the appliance is gas sound
after completion.

Do not use reconditioned or unauthorised gas
controls.

Disconnect from the electricity supply before
commencing servicing.

Before electrical reconnection, check that the
appliance is electrically safe.
Injectors
To replace the injectors proceed as follows:
1. Remove the pan supports, the burner and caps.
2. Using a socket spannner unscrew “J” (Fig. 6.1) and (Fig.
6.2) .
3.
Choose the injectors to be replaced according to
the data in the “Technical Data” chapter. The injector
diameter, expressed in hundredths of a millimetre, is
marked on the injector body.
J
Auxiliary,
Semi-Rapid
and Rapid
burners
J
Triple Ring
burner
Fig. 6.1
Fig. 6.2
6. Conversion to LPG