Rangemaster LECKFORD 90, Руководство пользователя и инструкции по установке

Страница: 16 / 40

12
The Clock
The clock must be set to the time of day before the oven
will work.
1.
Once the cooker is connected and switched on, the
display will start to flash.
2.
To set the time, turn and hold the
Timer (A)
knob to
the
Clock (C)
setting and at the same time turn the
Adjusting (B)
knob either clockwise or counter-clockwise
(Fig. 2.17)
.
3. Once you have set the time release the Timer (A) knob.
Setting the Minute Minder
A Minute Minder (E) is a feature that can be set for a number
of minutes and sounds an alarm once the specified amount
of time has elapsed.
1.
Turn the
Timer (A)
knob to the
Minute Minder (E)
setting
(Fig. 2.18)
.
2. Turn the Adjusting (B) knob to set the amount of time
required. e.g. 20 seconds (Fig. 2.19) .
3.
Turn the
Timer (A)
knob to the
Manual (D)
setting to
see the current time and the
‘Bell’
symbol on the display
(Fig. 2.20)
.
Cancel the Timer Alarm
Once the specified time has elapsed it will emit an alarm.
There are two ways to cancel the alarm:
1. Turn the Adjusting (B) knob counter-clockwise or
clockwise (Fig. 2.21) .
2.
Turn either the
Timer (A)
knob to the
Clock (C)
or to the
Minute Minder (E)
setting. Return to
Manual (D)
for
normal cooking mode
(Fig. 2.21)
.
NOTE
If the alarm is not manually switched off it will stop after
approximately 2 minutes.
ArtNo.300-0005 2BC
minute minder setting
E
A B
ArtNo.300-0006 2BC
minute minder setting 2
A B
ArtNo.301-0007 2BC
Stopping the oven 1
D
A B
E
C
ArtNo.300-0006 2BC
minute minder setting 2
D
E
C
A B
ArtNo.300-0005 2BC
minute minder setting
A B
C
A – Timer knob, B – Adjusting knob
Fig. 2.17
Fig. 2.18 Fig. 2.19
Fig. 2.20
Fig. 2.21