Rangemaster ECL45CFBL/BL, Руководство пользователя и инструкции по установке и обслуживанию

Страница: 9 / 48

7
Setting water hardness
The descale message is displayed after the appliance has
been operated for a set period of time, calculated on the
basis of the maximum quantity of lime scale which may be
contained in the water used.
The operating period can be extended if required, making
descaling less frequent by programming the appliance on the
basis of the real lime content in the water used.
Proprietary water hardness strips can be used to establish
water hardness of your water. Once you have established the
hardness. Proceed to set your appliance.
Level PPM CaCo3 Hardness
1 Below 50 ppm Very soft
2 50 - 120 ppm Soft
3 120-240 ppm Medium hard
4 240 - 360 ppm Hard water
5 Above 360 ppm Very hard
SELF CHECK
READY
WATER HARDNESS
WATER HARDNESS
LEVEL 4
LEVEL 4
Step 1. Press the "On / Standby" button. If the appliance has
not been used for awhile it will rinse.
Step 2. When the appliance displays "
READY
" press the
"Enter" button.
Step 3. Press the "+" button to scroll to "
WATER HARDNESS
".
Step 4. Press the "Enter" button.
Step 5. Press the "+" button to select water hardness level.
Step 6. Press the "Enter" button to confirm selection.
The appliance is now programmed to provide the
descale warning when necessary based on the actual
hardness of the water.