Range Servant Tee-Up, Руководство пользователя

Страница: 12 / 18

12
5.4.3 Replacing of the rubber tee
Sink the tee to the lowest level. There must be a ball on the tee to do it.

Take away the ball

Insert a cross-headed screwdriver inside the tee and screw off the tee.

Now the tee is loose and can be removed.

Replace the old, damaged tee with the new one.

Reverse the procedure to fasten the new tee.

Pull the tee (by hand) to make sure it is mounted correctly.

Place a ball on the tee.

Raise the tee from the lowest position. Now the the tee-up is ready to use.
5.4.4 Replacing or adjusting of the adjustment spring for the tee balance

Disconnect the power supply.

Remove the tee mats and the sheet (sheet below grass).

Loose the lock-nut using box wrench 19mm and allen key 6mm.

The bolt can now be adjusted so that the tee goes down when the ball is on and goes up when there is no
ball.