English
Instruction Manual – Hopper
- 10 -
Fig. 4: Warning signs on front hatch
•
Always disconnect the power supply to the machine before carrying out
maintenance or service work. The mains switch is located in the control box in the
lower right hand corner of the printed circuit board.
Fig. 5: Warning signs in control box
•
Never touch the circuit board or other electrical components in the control box. They
can be current conducting and cause injury to person and/or equipment damage
•
Mechanical or electrical alterations may only be undertaken in consultation with
Range Servant.
2.4 Authorised use
The ball-dispensing machine may only be used for the distribution of golf balls. For the
machine to operate properly, the balls must be clean and undamaged or else they may
get stuck and cause machine failure.
Distribution of balls may only start provided the machine has been installed according
to the instructions contained in this Manual.
2.5 Unauthorised use
Using accessories or spare parts not recommended by Range Servant might cause
personal injury and/or equipment damage and affect the operational reliability of your
ball dispenser. For safety reasons, use only those components recommended by us.
They are intended for your machine, they have been chosen for safety reasons and
they are approved by the manufacturer.
Damage caused by the use of accessories and spare parts not having been approved
by Range Servant or damage due to unauthorised technical changes are not covered
by the warranty obligation.