Range Road Enterprises Ltd
Box 944
Eckville AB T0M 0X0
www.range-road.ca
11.)
Slide the swivel coupler mount in, position the swivel up or down depending on your ATV hitch height,
tighten both bolts.
12.)
Grease coupler swivel.
13.)
Install hydraulic fitting into cylinder (if not pre-Installed), install brackets and cylinder on frame,
hydraulic fitting should be facing the side with the hose retainer straps, tighten all 4 bolts.
14.)
Install the hydraulic hose onto the cylinder and tighten.
15.)
Run the hydraulic hose trough the clips and bend the clips to hold the hose in place.
Use zip ties to secure the hose in place.