Range Road RR5029, Руководство пользователя

Страница: 31 / 38

Range Road Enterprises Ltd
Box 944
Eckville AB T0M 0X0
www.range-road.ca
Figure W: Throttle Control
17. Throttle speed may need to be increased when the Saw is under load.
18. Move the Saw Head slowly along the track and against the log to make the cut.
NOTE: Repeated adjustments will need to be made during cutting.
19. Shut off the engine if the blade binds, breaks, or another problem is suspected. Do not try to back the blade out
of the log while engine is running.
20. Trim off the rounded sides of the lumber
21. After the log is squared-off, boards or posts can be cut.
22. To prevent accidents, turn off the engine and disconnect the spark plug wire after use. Wait for the engine to
cool, clean external parts with clean cloth, then store the equipment out of children’s reach according to the
Store Instructions in the Engine Manual.
Servicing
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL STARTING:
Turn the power Switch of the equipment to its “OFF” position and wait for the engine to cool before performing any
inspection, maintenance or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM EQUIPMENT FAILURE:
Do not use damaged equipment. If abnormal noise, vibration or excess smoking occurs, have the problem
corrected before further use.
Maintenance Procedures
Many maintenance procedures, including those not detailed in this manual, will need to be performed by a
qualified technician for safety. If you have any doubts about your ability to safely service the equipment or
engine, have a qualified technician service the equipment.
NOTE: These procedures are in addition to the regular checks and maintenance explained as part of the regular
operation of the engine and equipment.
Engine Maintenance and Service
Follow the instructions found in the included engine manual.
Equipment Lubrication
1. Lubricate the Band Wheel Axles, Square and Round Posts with machine oil before each use.
2. Lubricate the Tension Handle with grease monthly or as needed.
Storage
1. Wait for engine to cool, then clean equipment with clean cloth.
2. Clean the engine and/or prepare it for storage according to engine manual instructions.