●
●
Page 29 of 31
SECTION V
MAINTENANCE & STORAGE
TROUBLESHOOTING
SYMPTOM
PROBLEM
CORRECTION
Clutch overheats.
Belt burns.
Drum won’t turn.
Clutch is slipping or drum is
jammed or stopped.
Immediately stop engine.
Remove spark plug wires.
Turn drum by hand to be sure it
turns freely.
Check belt tension.
Clear chipper chamber.
Chipping action seems too slow
or drum stalling.
Engine speed is too slow.
Belts are slipping.
Run engine at full throttle.
Check for loose or missing belt
and tighten.
When chipping, log seems to
vibrate excessively & “hammers”
hands.
Knife is dull.
Gap between knife & anvil plate
is too great.
Remove blade & sharpen.
Adjust gap as per instructions.
Chipper blade is hitting anvil
plate.
The gap between the knife and
anvil plate is set incorrectly.
Adjust gap per directions in the
front of this section.
Engine runs but drum doesn't
rotate
Inner shoes of clutch worn.
Retaining springs weak or
broken.
Loose drive belt.
Replace worn clutch.
Check belt tension.
Clear chipper chamber.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Содержание RR403
Страница 31: ...Page 31 of 31 SECTION V PARTS DIAGRAM...
