6
Key Lock Function
This allows the control panel to be locked to prevent any
accidental use.
n
n
IMPORTANT: The hob is equipped with a key lock to
lock the controls. This can be used when all hobs are off.
To switch on the key lock
1.
Press the right front zone button and “-” key together
(Fig. 2.6).
2.
Press the right front zone button. An “L” for locked
appears on all displays. If a cooking zone has the status
“
Hot
”, the “
L
” and “
H
” are displayed in alternating fashion.
3.
No adjustments can be made to any of the zones or the
timer.
4.
This sequence must take place within 10 seconds and
no other button other than the above may be pressed.
The input is otherwise cancelled as incomplete.
5.
The key lock remains in the locked state even if the
system was switched off and on again. A reset (mains
disconnection) of the control does not cancel the lock.
To switch off the key lock
1.
Press the right front zone button and the “-” key
together (Fig. 2.6).
2.
Press the “-” button again. If all steps are carried out
within 10 seconds the key lock is cancelled. The controls
will be in stand-by mode. Otherwise the input will
be incomplete and the control remains in the locked
condition, switching off after 20 seconds.
Automatic Shutdown
The hob will automatically shutdown if you ever forget to
turn them off.
Depending on the power level each cooking zone is switched
off individually according to a determined maximum
operating time if the assigned cooking zone has not been
operated during this time.
Any change of the cooking zone condition with the
allocated buttons (setting/changing the power level for the
corresponding hotplate) resets the max. operating time of
this cooking zone to the starting value of the operating time
limitation.
NOTE: If the cooking zone is hot then an ‘H’ will flash
alternately along with the error code.
0
0
0
0
Fig. 2.6
Содержание RMB60HPEIGL
