AFTER SALES SUPPORT
ITEM #
45090-14
email: [email protected]
888-892-2075
13
TANK/GAS LINE CONNECTION
Make 2-3 oz. of leak detection solution by mixing one part liquid dishwashing soap with three parts water.
Make sure regulator/control knob is in the “OFF ” position.
Spoon the detection solution on the connection between the LP Gas tank and the regulator.
Turn Gas on.
If any bubbles appear, remove the LP gas tank and reconnect, making sure the connection is secure.
If you continue to see bubbles after several attempts, remove the LP gas tank per “Disconnecting LP Gas Tank”
section, and contact 888-892-2075 for assistance.
If no bubbles appear after one minute, turn regulator/control knob to the “OFF ” position, wipe away solution and
proceed.
