Rane SIXTY-FOUR Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 40

Rane SIXTY-FOUR Скачать руководство пользователя страница 33

OWNER’S MANUAL

33

SIXTY-FOUR

Fader Assembly Removal

1. Remove all five fader knobs.
2. Remove all four screws holding the fader panel face plate.
3. Lift up the fader panel face plate and set it aside where it can’t get damaged.
4. Remove the two screws in the main panel at the top of the fader assembly.
5. Remove the two screws at the front of the fader assembly.
6. Slide the fader assembly out just enough to see the three white and blue wires and their connectors.
7. Unplug the three white and blue wire connectors.
8. Slide out the fader assembly completely.
9. The channel faders are mounted in pairs. Remove the four screws for each fader pair (3 & 1) or (2 & 4).
10. The magnetic crossfader may be removed by the two screws at each end of the crossfader.

Reverse this procedure to re-assemble.

• Plug in all three cables before installing the screws.
• Left white cable connects Decks 3-1 to J1.
• Right white cable connects Decks 2-4 to J3.
• Blue center cable connects Crossfader to J2.
• Test all the faders before installing the fader panel face

plate and fader knobs.

1

2

3

5

4

6

8

9

0

7

DECK 3-1

J1

DECK 3-1

J1

DECK 2-4

J3

CROSSFADER

J2

CROSSFADER

J2

DECK 2-4

J3

«
...
31
32
33
34
35
...
»

Содержание SIXTY-FOUR









































Отзывы:

Нет отзывов