4
Rear Panel
1.
AC Power Input:
Use the included power cable to connect this input to a power outlet.
2.
Fuse Cover:
If the fuse is broken, use a screwdriver or other tool to lift this tab, and
replace the fuse with a fuse with the same rating. Using a fuse with an incorrect rating can
damage the unit and/or fuse.
3.
Mic
/
Line Inputs:
Connect microphones or line-level devices to these inputs with XLR or
1/4” (6.35 mm) cables.
4.
Input Selector:
Use these switches to set what type of audio source is connected to each
mic
/
line input
: a microphone without phantom power (
Mic
), a microphone with +48V of
phantom power (
Ph
), or a line-level device (
Line
).
Note:
Most dynamic microphones do not require phantom power, while most condenser
microphones do. Consult your microphone’s documentation to find out whether it needs
phantom power.
5.
Mic 1 Priority:
Turn this knob to set how loud the volume level of all other inputs will be
when the Channel 1
mic
/
line input
receives an incoming signal. When the knob is turned
to the leftmost position, a signal received by the Channel 1 mic/line input will not affect the
other input signals at all. Turning the knob from the leftmost position towards the right
position will gradually have the Channel 1 mic/line input volume have priority over all other
input signals. When the knob is turned to the rightmost position, a signal received by the
Channel 1 mic/line input will mute all other input signals entirely.
6.
Line Out:
Use standard XLR cables to connect these outputs to your loudspeakers or
amplifier system. Use the
Master Level
knob to control the level of these outputs.
7.
Amp Output:
These outputs send the main/master signal from RM6 to your external
speakers. Connect these outputs to your speakers using a properly wired 4-pin Euroblock
connector and speaker wire.
1
2
3
4
5
6
7
Содержание RM6
Страница 23: ...23 ...
Страница 24: ...rane com Manual Version 1 2 ...
